Re: IH U6 engine--good or bad?

Posted by colekicker on August 02, 2005 at 19:31:51 from (12.33.199.98):

In Reply to: IH U6 engine--good or bad? posted by redcub on August 02, 2005 at 18:14:44:

Well, if you did find a U-6, it should be the same as an M, a 248. All the printed information I have found and the questions I have asked here say that. I have 3 and they are not all 248's. One is a 264. As for the cylinder head, it could be from an 248 or from a 264 or from a 281 depending on what may have been changed though the years. I one of my U-6's has a reman head, having the casting number ground off smooth and being stamped over. As far as I can tell, the powerplant engines are a kind of gray area that not too many people know to much information about. If you have any questions, let me know I may be of some help as I have some experience with them.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]