Re: Milling Farmall M head, How mutch?

Posted by ChadS on August 04, 2005 at 16:07:26 from (66.228.96.207):

In Reply to: Re: Milling Farmall M head, How mutch? posted by WK on August 04, 2005 at 10:31:10:

You could use the M manifold, or if you really want, order a new one from TISCO, they offer what is called a Vinson manifold. id think any persons who sell aftermarket new parts can get this style of manifold, it is a universal M-450 manifold, The intake ports are bigger, and straighter than the M-450 stock manifold, and you can get them for about the cost of a new manifold, maybe less if you know where to look. I used one on a Super M with a 4-1/8th X 6 inch stroker, and made 5 more hp with the vinson manifold, VS the stock SM manifold. Good Luck, Work on making combinations to make the compression higher in your engine, you can run it about 210-220 psi of compression and still work it in the fields, play, or whatever,, Good luck. ChadS

Follow Ups:

• Re: Milling Farmall M head, How mutch? WK 17:23:33 08/04/05 (1)
  • Re: Milling Farmall M head, How mutch? ChadS 06:34:31 08/05/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]