Re: Super H cam? valve? or maybe lifter trouble

Posted by kfox on August 14, 2005 at 07:33:35 from (63.18.237.38):

In Reply to: Super H cam? valve? or maybe lifter trouble posted by Dahlks on August 13, 2005 at 18:54:19:

I would suspect the cam gear. It might be loose on the cam. If the key is worn it might let the gear turn on the shaft a little each revolution, but the engine would still run until it lets go completely. You might take the cap off the mag and check it while your turning the engine over. If its doing the same thing, better check the cam gear. (As a afterthought, could be the crank gear also.) Just a thought, ken

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]