Re: the gap i

Posted by Janicholson on August 17, 2005 at 11:58:38 from (64.83.217.67):

In Reply to: Magneto posted by June on August 17, 2005 at 10:23:16:

Clean the points as you would for any ign. I think the gap is .013. check the condenser with an ohm meter. Short the lead to the can, then check ohms from the lead to the can. The meter should go up, then taper to nothing. This does not guarantee a good cond. but it eliminates the shorted ones.
Opens in the coil are not good. Send it to MagMan here on this forum if still no spark.
Jim Nicholson

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]