300 u loader hydraulics

Posted by James R on August 20, 2005 at 00:15:14 from (198.174.213.69):

I have a 300 utility with a tilt bucket loader on it. The controls are mounted directly on the reservoir, below the seat and on the right hand side. The front and back on the bucket seems to work fine, raising the bucket works but lowering the bucket is the problem.
Almost always the bucket comes down very,very slow and the tractor engine seems to pull down. Only rarely, the bucket will come down fast. If you turn the tractor off, it drops fast. I asked our local hydraulic expert, and he said to turn the switch on the front of the control, which I tried and the bucket would not move. Then, he said to hook the single hydraulic line to the other opening in the control, again nothing moved (except me when I reconnected it to how it originally was hooked up and got a shower in hydraulic oil). What's the problem?
Thanks for reading this and any help is appreciated.

Follow Ups:

• Re: 300 u loader hydraulics PAULIH300 03:59:23 08/20/05 (6)
  • Re: 300 u loader hydraulics James R 08:10:03 08/20/05 (5)
    • Re: 300 u loader hydraulics PAULIH300 09:21:42 08/20/05 (4)
      • Re: 300 u loader hydraulics James R 14:46:08 08/20/05 (3)
        • Re: 300 u loader hydraulics PAULIH300 17:30:52 08/20/05 (2)
          • Re: 300 u loader hydraulics AJB300 19:49:06 08/20/05 (1)
            • Re: 300 u loader hydraulics Easy 20:37:20 08/20/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]