Re: Firing order?

Posted by El Toro on August 23, 2005 at 04:38:02 from (152.163.101.13):

In Reply to: Re: Firing order? posted by iester on August 22, 2005 at 21:03:02:

With the timing marks on your cam and crankshaft
aligned are for the valve timing. You're probably
180 degrees off with your distr. You need to
pull No1 plug and bring No1 piston up on the compression stroke until it's at TDC and your
timing mark is in aligned with the indicator on the clutch housing. Your rotor should now be at No1, if not pull the distr. and rotate rotor to No1 position and reinstall. Since the rotor rotates CW your plugs wires should be going to the plugs in this order 1-3-4-2. Hal

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]