Re: clutch problem or shifter

Posted by Janicholson on September 06, 2005 at 06:32:34 from (199.17.6.200):

In Reply to: clutch problem or shifter posted by Carlton on September 05, 2005 at 21:27:27:

What probably happened is that the shifter tip inside the shift rail system (and easy to get to) came uot of the forth gear slot and as you went into neutral to go to reverse it continued into fifth. I would make a little bit slower transitions into neutral and, if it persists, I would probably pull the shift lever, and get the tip of it welded back to size, then ground down to fit the slots in the rails. Align the slots with a big screw driver befor reassembly.
A broken or weak spring in the rail detent system could also allow this to happen, but the platform has to be removed to get at these parts.
Good luck with just being careful shifting.
JimN

Follow Ups:

• Re: clutch problem or shifter Carlton 17:36:51 09/06/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]