Re: H brake band adjustment question

Posted by chadd on September 07, 2005 at 15:39:31 from (155.92.31.135):

In Reply to: Re: H brake band adjustment question posted by Dave in CT on September 07, 2005 at 14:15:58:

I had the same thing happen to our W6. The right side brake shaft rusted tight to the cover. We couln't remove it. So we got one from the junkyard and it turned out that they welded the metal plates at the wrong angle on the shaft. The brakes had to be floored to even slow that wheel with all of the adjustment used up. Of course we first found out after it was all reassembled. So we cut the old cover through and removed the shaft and then reused it. I should have known it was bad when the cover on the donor tractor came right off. . .

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]