Re: H brake band adjustment question

Posted by P Backus on September 08, 2005 at 07:25:51 from (69.128.32.90):

In Reply to: Re: H brake band adjustment question posted by Bob Frey on September 08, 2005 at 05:19:34:

Hmmm....
It just doesn"t seem like those drums would have worn that
much, but I suppose it could be. It seems like you"d see a ridge
on the edge of the drum then. I wonder if the lining material
from CIH is not thick enough. Whatever the cause is, the
problem remains. I"m guessing that it would be tough to get new
drums, although you could build them up with weld and turn
them down on a lathe. That wouldn"t be easy, because when you
weld on cast, the surface gets really hard and likes to ruin lathe
bits. So, barring other cam problems, my vote would be for
thicker lining material, or shortening the band a bit.
Just my thoughts.
Paul

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]