Re: 460 Hydraulic Question

Posted by Joe Evans on September 08, 2005 at 19:52:53 from (67.129.216.234):

In Reply to: 460 Hydraulic Question posted by greg johnston on September 08, 2005 at 14:04:29:

Our 460's auxiliaries (on each side, not rear) pee oil pretty badly, too.

I looked into replacing these, but did not follow through with it at the time--the replacement was not as straightforward as I thought it would be.

I unscrewed one QD to see what NPT thread they were. Well...they weren't NPT. It appeared to me that the QD itself was a 37 deg female JIC port threaded onto a straight O-ring x male JIC adapter which threaded into the manifold block.

I stopped while I was ahead and meant to look into getting the correct QDs with correct thread but just haven't done it yet. I was hoping they were a simple pipe thread device. At least the ones on our 460 are not.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]