Re: clutch or gear stuck on hills

Posted by K.B.-826 on September 08, 2005 at 21:02:29 from (24.197.218.130):

In Reply to: clutch or gear stuck on hills posted by Eddie B on September 08, 2005 at 20:41:07:

Your main clutch and TA linkages need to be adjusted. Your TA clutch is not disengaging when the pedal is pushed down. At the same time, the TA ramp/rollers are locking up as they should normally do in this situation, creating the effect of the TA being in direct drive and TA at the same time, which just is just like being caught in two gears at once- causes a binding effect. As you try to force a shift with this happening, your worn out shift linkage does not totally disengage the gear you're coming out of, you stick it in another gear, you let out the clutch, and the engine stalls. Get a I&T manual and spend a little time going over a few adjustments.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]