Re: FH Wheels on f-20

Posted by Mike Androvich on September 13, 2005 at 13:14:25 from (24.154.55.60):

In Reply to: Re: FH Wheels on f-20 posted by Jonathan Brown on September 12, 2005 at 13:43:12:

I think the key thing you said was "welded". All factory rims that had this flat spoke (at least that I know of) the spokes were "swaged" into the rim, meaning pressed and clamped by extreme hydraulic pressure with absolutely no welding. If you see evidence that the spokes were welded onto the rims then these were steel wheels that were cut off and nicely welded onto rims. Could you take a closeup picture of where the spoke attaches to the rim?

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]