Re: F10 loader

Posted by Allan in NE on September 19, 2005 at 15:47:42 from (148.78.243.26):

In Reply to: F10 loader posted by Fisherman on September 19, 2005 at 15:08:11:

Hey Guy,

This is probably the simplest repair that you'll ever do.

Set your bucket on a couple of 15 gal oil barrels 'er something.

One at a time, pull the pin out of the ram/front cross member and let the arm down on an upside down bucket or some such thing.

I haven't done one in 30 some years, but as I recall, there is a 3/8" short bolt thru a collar at the forward end of the cylinder. Loosen it until the collar clears and then just pull that ram clear outta the cylinder.

Replace that leather and reinforcement spring at the other end of the ram and slide it all back together.

Probably 10 minutes tops on each side.

Allan

Follow Ups:

• Re: F10 loader fisherman 09:26:52 09/20/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]