Re: IH Super C Electrical Woes

Posted by Tom Yaz on September 25, 2005 at 08:38:19 from (71.64.96.83):

In Reply to: Re: IH Super C Electrical Woes posted by Tom Yaz on September 24, 2005 at 19:50:56:

Thanks Fellas,

But you all assume I understand basic testing.

I dont (but willing to learn)
You all say "with ignition on" Does that mean
pulling out the switch only, or should I also be
pulling on the starter switch (cranking)
As for testing if coil is receive current: This is a 6 volt positive ground tractor. (OEM) dont think I have ballast/resistor.

As for testing if coil is receiveing current:
I see a pos/negative connection on the back end.
where do I stick the voltmeter ends?--and again do
I just pull the ignition switch or crank as well when testing? Sorry being so ignorant, I never
received any electrical edumacation(but hey I know
computers pretty well? ;) )

Tom

Follow Ups:

• Re: IH Super C Electrical Woes Janicholson 10:17:27 09/25/05 (1)
  • Re: IH Super C Electrical Woes Tom Yaz 19:19:57 09/25/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]