Re: steering box ahaft for int.300

Posted by big fred on October 05, 2005 at 10:42:56 from (130.76.32.16):

In Reply to: steering box ahaft for int.300 posted by ron bond on October 05, 2005 at 07:01:39:

This is what the right side shaft looks like in a 460U gearbox, the 300U is similar. The shaft doesn't go all the way thru, the left and right shafts mesh together with the sector gear. the other one is for the rack on the P/S cylinder to mesh with. On the left end of the picture there is a bolt that is used to adjust the backlash, yours might have that bolt broken or missing, which would account for the side play in the shaft. In any case, you'll have to take the gearbox out and disassemble it.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]