Re: setting the float ina carb.

Posted by the tractor vet on October 10, 2005 at 18:18:04 from (4.124.87.187):

In Reply to: setting the float ina carb. posted by Jon in ohio on October 10, 2005 at 15:20:06:

with the carb apart turn the upper half upside down and the float resting against the needel and seat with the gasket in place masure from the face of the gasket to the top of the float and bend the tang as needed , don't have my books next to me and i got my boots off and not running out to the truck so i don't have the massurement at hand.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]