Re: 100 oil pump

Posted by Dave BN on October 18, 2005 at 19:35:53 from (205.188.117.73):

In Reply to: 100 oil pump posted by Robert in MS on October 18, 2005 at 14:39:49:

You can rebuild yours which I would be tempted to do after a total rebuild. New pressure spring and maybe the plunger too depending on how it looks, new bottom plate or resurface yours should be all you need. There is a spec on the gear tooth gap but I don't remember where I saw it. You may need to replace one or both gears if the gap is too big. All of this can be done with the body of the pump still in the engine. Post a picture when your done. Dave

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]