Farmall & IHC Tractors Discussion Board |
Went on a 30 mile fall tractor ride Sat.
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Paul Shuler on October 26, 2005 at 15:37:51 from (170.29.5.10):
I went on the Sean Haskins fall tractor ride last Sat. Wow it was great. 30 miles on the back roads of the Glade top trail in the Ozarks hills. The weather was great and the trees all full of color.There was a cook out for the noon meal. One thing that was cool was we stopped at the old Hammond mill built in the 1800s that a couple has turned into there home. The only thing I will do different next time is I am going to stop at Harleys on the way down and borrow one of his M's. I took my little C cause it was light to haul the 90 miles but it was geared way way lower than anything else there. The H's and M's where just putt puttin and I was wide open in 4th gear with a little blue flame coming out of the stack on the hills. And there was lots of hills. There where about 25 tractors of all colors but mostly M's, MD's and H's. I will post some photos as soon as I can. Thanks for letting me ramble on. Paul
Follow Ups:
Home
| Forums
Today's Featured Article -
Timing Your Magneto Ignition Tractor - by Chris Pratt. If you have done major engine work or restored your tractor, chances are you removed the magneto and spark plug wires and eventually reached the point where you had to put it all back together and make it run. On our first cosmetic restoration, not having a manual, we carefully marked the wires, taped the magneto in the position it came off, and were careful not to turn the engine over while we had these components off. We thought we could get by with this since the engine ran perfectly and would not need any internal work. After the cleanup and painting was done, we began reassembly and finally came to t
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|