Re: Cluth adjustment Problems

Posted by the tractor vet on October 28, 2005 at 18:46:35 from (4.124.82.66):

In Reply to: Cluth adjustment Problems posted by MagMan on October 28, 2005 at 18:38:52:

You did take out the shipping screws or the nuts that they stuff down behind the finger or the three bolts that hold the plate against the springs now i am not sayen that they all come that way but the one i get always have either one depending weather the plate is drilled and tapped if it is not then they stuff nuts behind the fingers and if ya don't catch it when you install the plate then they fall down in feather and ya don't see them and 99% of the time this is why ya run out adjustment.

Follow Ups:

• Re: Cluth adjustment Problems Janicholson 19:38:24 10/28/05 (4)
  • Re: Cluth adjustment Problems MagMan 02:54:42 10/29/05 (3)
    • Re: Cluth adjustment Problems Janicholson 08:08:39 10/29/05 (2)
      • Re: Cluth adjustment Problems MagMan 16:48:14 10/29/05 (1)
        • Re: Cluth adjustment Problems Janicholson 20:09:23 10/29/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]