Re: Dead solid miss in 350D

Posted by MN Scott on November 02, 2005 at 18:30:41 from (206.9.216.40):

In Reply to: Dead solid miss in 350D posted by Bleed IH Red on November 02, 2005 at 17:34:41:

The 350 has the continental engine in it. Do you have oil in water or water in oil? Are you loosing coolant? Could be a compression problem, bad valve, blown head gasket, ect. Did the miss start at once or has it been slowly getting worse? Do you hear a popping noise in the exhaust, that would indicate a bad valve. You had the pump rebuilt but not the injectors? A bad injector could have those symptoms. I would pull them first and have them tested. If they are good then you will have to go looking in the motor to find were you are loosing compression. Pistons and sleeves are no longer available for that engine but bearings, gaskets and some other parts still are. Good Luck!

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]