330U Stops Running

Posted by Tweeter on November 13, 2005 at 13:26:47 from (72.9.21.198):

I got my wiring finished on my 330U and everything works there. I got to start it up today but it dies after about 1 or2 minutes. It is hard starting unless I place my hand over the intake and keep it there. While holding my hand on top of the intake I cant rev it or it will die out. My carb is dripping gas which i was told before that the float is probably stuck up. I took the carb off and float was moving freely. I didnt have time to put it back on and test it again. Should i rebuild the carb with a kit and also a NEW float? It is a Zenith carb with the drain plug out front.

Follow Ups:

• Re: 330U Stops Running Andrew Z 13:35:32 11/13/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]