Re: Carb adjustment on an H

Posted by riverbend on November 13, 2005 at 19:15:42 from (208.160.33.81):

In Reply to: Carb adjustment on an H posted by Alicefan on November 13, 2005 at 17:43:08:

Assemble the needle, seat, and float into the top of the carb. Turn the assembly over and set the float so that it is sitting level. The spec for the float is 1 27/32" from the bottom of the float to the upper body (top cover).

There are operators, parts, and service manuals available for this tractor. You can get them from this website, your local CNH (?) dealer, or an outfit called binder books. I prefer the latter.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]