Re: M steers hard...too hard

Posted by Aces on November 15, 2005 at 20:05:08 from (65.54.155.14):

In Reply to: M steers hard...too hard posted by Farm-all-the-way on November 15, 2005 at 19:30:02:

Farm All The Way could be bad thrust bearing on the bottom of bolster shaft. After you remove the lower bolster you will have to loosen the nut on top of the gear so it is flush with top of shaft, if the bolster shaft is tight in the gear, put big hammer on nut and hit it with a bigger hammer to jar it loose the gear and shaft have tappered splines to help heep them tight. I would also check that the bolster housing is thraight up and down.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]