|
Farmall & IHC Tractors Discussion Board |
Re: rusty gas tank cure I HOPE
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Slappy on November 17, 2005 at 05:36:04 from (143.88.85.82):
In Reply to: rusty gas tank cure I HOPE posted by goterdone on November 17, 2005 at 03:14:56:
Goterdone, Good strategy in my opinion. I usually clean and seal my gas tanks first thing. Not for the frugal-minded, however, as it costs about $50/tank. I like the POR-15 system better than the Eastwood Company PVC-base system. Both work really well, but you have to buy acetone and muratic acid extra to use with the Eastwood product, and the POR product leaves a nice even silver color in the finished tank, whereas the Eastwood sealant leaves a lumpy white coat that yeallows with use. Some people have advocated a product called Red Kote, but I have never been able to find it. I really like the idea of the copper extension you discussed (you still get sediment even in a sealed tank). Can you elaborate a bit on how you made it? Do you tap the fuel bowl casting and thread the copper? What size holes seem to work best in the copper tube?
Follow Ups:
Home
| Forums
Today's Featured Article -
Trenching With a Plow - by Staff. Introduction: This interesting information came from one of the discussion forums here at YT. We thought we should place it up front so it could be read by anyone interested in putting old iron to work. [Editor] I tried something new today, and it worked so well I thought I should post it - in case it might help someone else. I'm running 100 yards of 4" drain pipe from the gutter downspouts of our house to a pond down the hill. This should hel
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
