Re: charging system modification

Posted by airtech on November 17, 2005 at 14:47:48 from (209.247.222.27):

In Reply to: Re: charging system modification posted by Bob on November 17, 2005 at 14:02:23:

Joe is exactly right on the procedure. I done both a 424 and 384 with this modification and both have worked excellent. After cranking the tractor, it requires raising the RPM at times to start the alternator charging. Once the unit starts charging, it will continue to charge if the RPM is lowered back to idle speed. The bracket is simple to contruct or the mounting bracket from an old chev v8 will allow for a shortcut in bracket fabrication.

Follow Ups:

• Re: charging system modification airtech 14:50:18 11/17/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]