Farmall & IHC Tractors Discussion Board |
Re: Clutch adjustment-Hugh-Allen
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by the tractor vet on November 19, 2005 at 20:19:44 from (4.124.82.15):
In Reply to: Clutch adjustment-Hugh-Allen posted by Clutch problems on November 19, 2005 at 18:35:40:
Just what seems to be the problem here ????? If the clutch has the correct amount of free travel then the clutch should work the way it was designed as far as changing the adjusting screws on the finger that is not needed as that is set to factory spec. Now if something has come apart in the pressure plate or one of the damper spring has broke and come out of the disc then it is time to R AND R the clutch . Now if you are not getting the clutch to stop as soon as you push it down and your getting gear grind then there is nothing wrong as this is not a car or pick up and the gears do not stop that fast . Idea the engine down then push the clutch in and wait a couple seconds and lightly bring it into gear.
Follow Ups:
Home
| Forums
Today's Featured Article -
Field Modifications (Sins of the Farmer) - by Staff. Picture a new Chevrolet driving down the street without it's grill, right fender and trunk lid. Imagine a crude hole made in the hood to accommodate a new taller air cleaner, the fender wells cut away to make way for larger tires, and half of a sliding glass door used to replace the windshield. Top that off with an old set of '36 Ford headlight shells bolted to the hood. Pretty unlikely for a car... but for a tractor, this is pretty normal. It seems that more often than not they a
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|