Re: can't seem to find the seals

Posted by fenton on November 24, 2005 at 07:17:27 from (64.136.49.226):

In Reply to: Re: Farmall CNKS I need some advice posted by Peabody on November 24, 2005 at 06:52:07:

Peabody, I looked at the housing and the removable gear and don't see any seal, other than what looks like brass inserts in both gear shaft holes on the housing body. Those look to be set in and very tight making removal difficult. I looked at the other attached half of the unit with the two gears coming out and took out the removable gear and in that hole is also a set in (I think) brass seal? The gear shafts are not worn or grooved in any way and the holes that the shafts sit in look good also, no apparent wear.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]