Re: one last question for Peabody?

Posted by El Toro on November 24, 2005 at 13:44:03 from (64.12.117.13):

In Reply to: Re: one last question for Peabody? posted by fenton on November 24, 2005 at 09:39:10:

According to my parts breakdown there are a total of 16 pieces in that pump. There's a pump body seal that looks to be an oring & the drive shaft seal. I think this would be the one to leak
into the governor gears. My book has the pump being driven by the cam shaft. This also drives the governor, so we all may be right. There are two cover seal rings that are installed in the pump cover. There's no mention of any other seals. Is there a seal where this drive shaft protrudes through and engages the governor or cam. That's probably where the shaft gets a groove worn into the surface from the old seal. I hope instructions come with kit. Have a nice Thanksgiving. Hal

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]