Farmall & IHC Tractors Discussion Board |
Re: Block Heaters.....
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Hugh MacKay on November 28, 2005 at 14:28:42 from (64.228.11.91):
In Reply to: Block Heaters..... posted by Dellbertt on November 28, 2005 at 12:45:25:
Dellbertt: You'll probably get as many preferences as there are heaters. The one I always liked was the external circulating heater. They only worked well in applications where you could hook inlet to a block drain and hook the outlet to a port in the water jacket of the head. that kept the canister upright and created a thermosyphon type of circulation. Hot water rose to top and entered the head then flowed down through block to the block drain and inlet to heater. Most Deere diesels of the 70 and the IH 282 diesels were great candidates. These were available anywhere from 750 to 1500 watts and had a thermostat. I used the 1500 watt in my 2 - 282 and my 404 Deere. At -30F you could plug them in about 2 hours before you wanted tractor and it was a summer like start. What I liked about these, I rarely used my tractors in winter, thus one didn't need to leave them plugged in. I had the frost plug type in my 1066, worked well but at -30F it had to be plugged in overnight. These tank type sounded like the electric tea pot on 40 years ago, you could actually hear them bubbling. My recomendation is look at your use, if your starting that tractor every day, I'd go with the frost plug type and leave it plugged in all the time. For ocasional use I'd pick the tank type, they draw a lot more juice per hour, but they are quick. Now, I have a question, anyone have any experience with propane or oil fired circulating heaters as being used on large diesel trucks?
Replies:
Home
| Forums
Today's Featured Article -
Fabrication (Who Me? Make it myself?) - by Chris Pratt. First of all, what are the reasons for not fabricatin your own parts? Most judgements on what should be purchased rather than fabricated stem from: Originality - If the tractor restoration is to be 100% original, it is likely that you should spend the time and money to locate the component in the used or New-old-stock market. Since this can be extremely difficult, you may want to fabricate the item or purchase a modern replacement temporarily, but eventually, you s
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|