|
Farmall & IHC Tractors Discussion Board |
IT WORKS !!
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by LumbrJakMan on December 11, 2005 at 12:48:44 from (205.188.117.73):
Well Everyone , With all the help I got here , and some determination, and Minimal Swearing . IT RUNS ! I started my Super M today here in New Hampshire. It is my first rebuild. I tore it right down to the Block and it Purrs like a Kitten . I got it up to Temp this afternoon and re tourqued the head. I wanna know if I need to reset the valves after re tourquing the head , or if they will be still within tolerance . I took a few good turns on some of the head bolts . I couldnt be happier to hear it sit and run . I re built the carb also and it all seems worth while . Cant wait to Pull it this Spring . Thanks again for all the help and Please Know it was well needed ! Chuck D.
Replies:
Home
| Forums
Today's Featured Article -
Oil Bath Air Filters - by Chris Pratt. Some of us grew up thinking that an air filter was a paper thing that allowed air to pass while trapping dirt particles of a particles of a certain size. What a surprise to open up your first old tractor's air filter case and find a can that appears to be filled with the scrap metal swept from around a machine shop metal lathe. To top that off, you have a cup with oil in it ("why would you want to lubricate your carburetor?"). On closer examination (and some reading in a AC D-14 service manual), I found out that this is a pretty ingenious method of cleaning the air in the tractor's intake tract.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
