Re: removing the crankshaft pulley on Super C

Posted by El Toro on December 13, 2005 at 07:19:22 from (152.163.101.13):

In Reply to: Re: removing the crankshaft pulley on Super C posted by Keith-OR on December 13, 2005 at 06:49:33:

Those bottle jacks are designed to be used in the vertical plane. We had trouble using them in the horizontal plane and they would quit working, but fine when vertical. Porta Power will work either way. We were trying to get a piece of equipment to move that weighed 15 tons into the exact position from where it was removed. Porta
Power did the job. We used a mobile crane to
remove it from the building & to reset it back in the building. It was actually a test cell and it had a removable roof. When the crane went out
to make a lift they sent a rigger along too. Hal

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]