|
Farmall & IHC Tractors Discussion Board |
transmission noise
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by sven on December 18, 2005 at 12:58:42 from (216.193.143.21):
We recently started restoring on a farmall 100. The tractor was all original and showed very little wear, probably a fairly low hour tractor. However, the transmission whined a bit more then we thought it should. After taking the tranmission and differeintal apart, we found that all of the bearings were in excellent shape, with no play at all. To try and correct the noise, we used the shims at the differntial to move the ring gear closer to the bevel gear that comes from the transmission. This eliminated the play that exsisted between these two gears. However, after putting everything back together and running the tractor, the transmission seems to make more noise then before, reverse being the worst. Does anyone one exactly were this noise is coming from, and possibly how to correct it. Thanks
Replies:
Home
| Forums
Today's Featured Article -
Experimental Tractors Article - by Danny Bowes (Dsl). Tractor technology appears to have nearly hit it's pinnacle of development. If you agreed with the subtitle, you are rather mistaken. Quite, actually. As a matter of fact, some of the technology experimented with over 40 years ago makes today's tractor technology seem absolutely stale by comparison. Experimentation, from the most complex assembly to the most simple and mundane component, is as an integral a part of any farm tractor's development
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
