Re: carb questions

Posted by old on December 30, 2005 at 18:40:14 from (207.69.137.20):

In Reply to: carb questions posted by Levi Keech on December 30, 2005 at 18:22:07:

Carb iceing is normal and is just a fact of life. As far as setting the screws its about 3/4 turn out for the idle jet and 1-1/2 out for the main jet. Those are starting places and you have to adjust them from those points to get them set right. Also are you sure you have it put back on right, it can be a pain getting the gov/carb hooked up correctly.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]