Re: 560D and 460 gas

Posted by JakeF on December 31, 2005 at 20:08:47 from (64.146.188.222):

In Reply to: 560D and 460 gas posted by ryan from WI on December 31, 2005 at 09:50:14:

Back when we ran the M's and Super M's we pulled a 2 X 14" tumble bug. When we went from the 140 rollover 4 X 18" to the 145 hyd reset rollover we couldn't use the 1456 as it did'nt have the front weight to hold the tractor down while lifting the plow outta the ground, even with a full set of weights and calcium in the fronts. We now plow with a 7140MFD, but you can get by with a 7120MFD. For a little while we plowed with 3 X 16's and a 766, worked real nice. Even used an 884 on that plow but had to add 15.5X38's full of fluid 3 sets of rear weights and a full set of weights and fluid up front. All our plowing is on irrigated ground and done between 4-5.5 MPH. Jake

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]