Re: Crank shaft

Posted by El Toro on January 03, 2006 at 16:52:26 from (205.188.117.73):

In Reply to: Re: Crank shaft posted by Farmall lover on January 03, 2006 at 15:31:15:

It sounds like the same thing. Is there any writing on the container? This would be fine on the bearings. I never used it in cylinders or on pistons. I would pour some engine oil into each cylinder and crank over the engine so everything is coated with oil prior to starting the engine. Make sure you get oil pressure asap.
You can pump oil into the oil gallery where the oil gauge is installed using an electric pump using a clean 1/4" hose & a clean container of oil.
It will force oil throughout the engine and watch your oil pressure gauge for movement. Then your engine is prelubed. Hal

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]