Re: Finally, The pully is off

Posted by scotty on January 12, 2006 at 05:19:30 from (199.231.49.128):

In Reply to: Finally, The pully is off posted by scott#2 on January 10, 2006 at 15:11:47:

scott,
Glad to hear you got it off! You cant hone the bore on the pulley because you have the keyway to contend with. Your best bet would be to hold the pulley in a lathe and get a flapper wheel with a drill and buff until you get the right size in the bore. I made mine .0005 smaller than the crank diameter. I have seen as much as .002 interference fit on that pulley. They can be a bear!

scotty

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]