Re: Micrometer how to read it.

Posted by Aces on January 18, 2006 at 15:49:58 from (65.54.97.188):

In Reply to: Micrometer how to read it. posted by Kelly C on January 18, 2006 at 09:01:54:

Kelly Every one understands money, so just thing of it as a 10$ bill. If it is a 0 to 1 inch it will be .ooo to 1.ooo if a 1 to 2 it will be 1.ooo to 2.000. So 1 inch is $10 $7.50 is .750 inch or 3/4 on the mike $5 is .500 or half way on the mike $2.50 is .250 inch or a 1/4 way. Each line on the thimble (or the part that turns) is 1 penny or .001 inch, each line on the spindle (or rhe part that dose not turn) is 25 cents or .025 of an inch. Not hard to read if you think of it this way.

Replies:

• Re: Micrometer how to read it. Lee 18:22:42 01/18/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]