|
Farmall & IHC Tractors Discussion Board |
Calling the correct police - Super A question
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Slappy on January 26, 2006 at 17:35:59 from (68.221.190.36):
I have a "50 Super A that is well used but in very original condition. Several parts had been removed and came to me in a box. Among them were the headlight supports. The short one is obvious, but the long one had about a 30 degree bend in it about 1 and 1/2 inch from the end the inserts into the casting. The parts catalog shows the long rod to be straight - not bent. At first I thought perhaps the PO had hit something and bent the rod. But this week I saw the exact rod on e-bay and the seller says it came from a SA. Does anyone know if the bent rod was put some SA models? Was it used in conjunction with some type of equipment? In use, would the bar be oriented so that the headlight was in front or behind the radiator? I"m not an originality freak, but I would like to keep all the original parts on the old girl I can. Any tips to the puzzle are appreciated.
Replies:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
