Re: Super C Grill Mounting Help

Posted by Brownie 45 on January 31, 2006 at 10:37:59 from (207.177.82.210):

In Reply to: Super C Grill Mounting Help posted by SuperCDon on January 31, 2006 at 05:11:38:

If I remember correctly, the"nut" on the end of your bracket needs to be nearly verticle [ 90 degrees ] so the grille bolt will match up correctly. I think that the hole in the grille is slightly oversize compared to the bolt. Guessing here, but the bolt is either 5/16" or 3/8" and the hole in the grille is maybe 7/16". Possibly 1/2". Someone may be more exact. When we had the grille off, we would re-mount it starting with the top 2 bolts & then eyeball the front lower bolt hole with a little judicious bending of the bracket in your photo.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]