Re: differential super A

Posted by gene bender on February 05, 2006 at 01:11:18 from (66.43.221.211):

In Reply to: differential super A posted by banjo on February 04, 2006 at 16:24:41:

Just do one side at a time. I remove the rim and center section. The final drive and diff shaft and housing will balance hooked to a cherry picker real nice. Drivers side is the fun one with all the stuff you have to remove to get to the trans seal. You mite want to split the tractor at the front of the tranny and do that seal also. Then you can dismantle the whole rear end to get the seals. Check the bearing on the input shaft if you split the tractor. I have found it sure can quiet the tranny with a new bearing.

Replies:

• Re: differential super A banjo 10:57:35 02/05/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]