Re: pto shaft gear removal

Posted by Haas on February 07, 2006 at 06:58:52 from (12.65.42.8):

In Reply to: pto shaft gear removal posted by thumbanger on February 07, 2006 at 04:12:16:

I guess you are talking about the drive gear for the belt pulley drive that is on the top shaft. That thing is really hard to get off!! I ended up making a puller out of heavy iron to go behind the gear. A bearing separator would work too, but I did not have one of those. The puller I made is similar to one shown elsewhere on this forum recently for removal of the front engine pulley. As to the PTO gear. It should come off fairly easily with a gear puller. Don't try to drive the shaft out. That won't work because the woodruff key will contact the housing and prevent you from driving the shaft out. You will end up damaging something.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]