Re: 1940 M oil gauge problem

Posted by chadd on February 17, 2006 at 09:08:49 from (155.92.30.117):

In Reply to: 1940 M oil gauge problem posted by Dandy7 on February 17, 2006 at 08:41:39:

If the engine is cold, then the needle on your M should get very close to pegging the gauge. It is supposed to have a maximum of about 75 psi of oil pressure, so that sounds about right for an engine in good condition. Like El Toro said, let it run a while and I am almost positive it will fall a little. Now if you were to put on a gauge that goes to 100 and find numbers above the maximum, there is something wrong, as the relief valve should be keeping your oil pressure at or below about 75 psi. If it ain't broke, don't fix it.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]