Farmall Tractors Discussion Board |
Re: Super C 2 point hydraulic hitch
[ View Follow Ups ] [ Post Followup ] [ Return to Farmall Tractors Discussion Board ]
Posted by Stan and Margot(VA). on January 09, 2000 at 10:44:58 from (207.172.106.215):
In Reply to: Super C 2 point hydraulic hitch posted by Bud W on January 09, 2000 at 08:02:14:
I think it came out in '53 for the Super C. Alot of the late Super C's I have seen have the hitch as well as most of the 200's (same hitch). Guy Fay might be able to help with production numbers for tractors with the optional hitch? If most of the tractors you have seen were C's and not Super C's that is why you haven't seen many, the hitch was never offered for the straight C. Only C's you will find with the fast hitch are one's that people like me bought from a salvage yard and mounted on an older tractor. The hitch is very usefull (with 3 angles of hydraulic control) and can easily convert to 3 pnt. The 230's have an updated design that is not interchangeable (as far as mounting the hitch), but the implements are the same. The smaller style fast hitch implements have 2 1/2" prongs compared to the 3" prongs for the larger tractors (the 300/400's that were introduced with the hitch in late '54, early '55). Stan(VA). PS - My wife caught me woking on this post and thought that I wasn't doing a very good job, so with tongue planted firmly in cheek, sat on my lap and "helped out". She didn't see the original question, just first half of my response. I think she wanted to go farther, but was laughing so hard when she got this far that she just stopped and told me to delete it ...
I think you should just get rid of the old thing! It just takes up a lot of space and I'm sure your wife thinks it's competition for her. After all, who's more important? Don't you need 5" prongs anyway? I read in the latest magazine that 3" prongs really aren't as useful anymore. Any tractor owner worth his own salt would not get a 3" prong. Come on, get with it. It's the 2000s you know! Tractors are on their way out. Wives aren't. You can't take your tractor out to dinner.
Follow Ups:
Home
| Forums
Today's Featured Article -
Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
Latest Ad:
1997 cub cadet 7275 compact utility tractor 4wd hydro trans cracked block 3500
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|