Re: tap for exhaust manifold

Posted by GordoSD on February 20, 2006 at 08:01:36 from (66.115.200.140):

In Reply to: tap for exhaust manifold posted by massey 44 on February 18, 2006 at 18:32:48:

Well, I'm going to cut the grooves in my plug. After all, the taps you buy for 200 dollars have LARGE grooves in them for this purpose. And if it doesn't work better I'm out 4 bucks. Besides kinda hard getting down in that manifold hole with a cutoff. I used a sawsall with hacksaw blades to cut the old pipe, just one cut and they came right out after working the 1/2 inch I left protruding.

Gordo

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]