Re: Case/IH CX 90- troubles

Posted by BC Glenn on February 23, 2006 at 07:58:08 from (207.69.139.134):

In Reply to: Re: Case/IH C 90 posted by Big Don on April 27, 2005 at 10:10:17:

Some posts awhile back showed some of you are familar with these tractors, so I was hoping you could give me some insights. Bought a Case-IH CX 90 with low hours a few months ago and has been great. But recently the shuttle shift (forward - reverse) on the steering column seems to have locked-up. The transmission (range and main) and clutch all seem to be working normally. When I try and move the shuttle lever out of the middle neutral area - either forward or back the tractor starts to go that direction and then any additional pressure results in gears starting to grind (even with the clutch pushed in). I can start the tractor with the shuttle in forward or reverse, but the high-low range lever must be in neutral and then it starts to grind with an attempt to put it into gear. Any suggestions - I'm not in the position to readily load this thing up and haul to a dealer. Thank you very much for any suggestions or recommendations. Any affordable repair manuals out there for this tractor (dealer $475 repair/$116 parts)?

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]