Re: 706- puddles under the plugs

Posted by the tractor vet on March 08, 2006 at 09:01:50 from (64.179.117.124):

In Reply to: Re: 706- puddles under the plugs posted by IndianaScott on March 08, 2006 at 07:50:16:

No this is common but i bet ya that they never checked the block . Ya should see how bad the blocks on 806 and 1206's warp that is why and again that ya have to check on them 99% of the time ya have to bore the block and install the .010 oversize sleeves just get it stright and round and the heads have to be done then ya got to get the valves set in the head just wright these things are getting old and blocks and heads warp even the line bore needs to be trued . When we did Eugene's it got everything . even a custom balance job sure did smoothe that one out and gain some extra power . But maybe we got to carried away on that with the C Cing of the head the balance job and rebuilding and blueprinting of the cam .Hey it is only money .

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]