Re: 6V Generator Output

Posted by gene bender on March 15, 2006 at 03:03:11 from (66.43.221.211):

In Reply to: 6V Generator Output posted by Red/Green on March 14, 2006 at 15:56:35:

Is there 6v at the batt term on the cutout.Connect a jumper to ground on the battery and with other end go to gen and then cut-out and then back to the steering post control as thats where the system gets its ground. You can also ground the field term on the gen and that should make it charge if not the cut-out is faulty. If it doesent charge with field grounded the gen is at fault. Mite just need to clean the points on the cutout. These are very simple systems and not that hard to trouble shoot.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]