Re: IH 666 pto slipping

Posted by the tractor vet on March 20, 2006 at 11:58:37 from (66.202.111.11):

In Reply to: IH 666 pto slipping posted by 4440 puller on March 20, 2006 at 11:35:35:

I also should have said that like most tractors they have been turned up from factory spec. so if this one is cranked up then one should add that amount of percentage to the lock up pressure as lets say and 806 from the factory lets say 94 ponys but it was tweeked to 110 and factoy lock up was 245 it will start slippen just a littel under heavy loads so ya reset the PTO pressure to 250 myself mine is set at 275 and she will not slip even when she is killed . SO just some food for thought.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]