Re: Changing Ring Gear on Super C

Posted by Hugh MacKay on March 27, 2006 at 09:59:06 from (209.226.106.78):

In Reply to: Changing Ring Gear on Super C posted by CharleyFarmall on March 27, 2006 at 03:09:54:

Charley: Well, at least we know who fears the Mrs. Welcome to the club gentlemen.

Seriously, when I did mt Super A with flywheel still on tractor, a neighbor IH technician came with torches. He hung the new ring gear on a coat hanger, passed me the welding gloves. As the old ring came loose, I pulled it off using gloves, while he turned to heat the new one. I went around the flywheel with wire brush, and no sooner laid the brush down until he had gloves on coming with new ring. My guess is this probably took less than 5 min. He just went continuous around the ring with torch being very careful not to get it red. It's surprising how little heat it takes.

Replies:

• Re: Changing Ring Gear on Super C the tractor vet 10:10:04 03/27/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]