Re: Slow cranking M

Posted by Brownie 45 on April 04, 2006 at 06:20:01 from (207.177.82.111):

In Reply to: Slow cranking M posted by MarkCo on April 03, 2006 at 18:19:03:

After a hard start, feel the cable end connections at the starter switch, starter, & battery [ground connection also]. Are they warm/ hot? If they are, there is a high resistance at that point. A lot of battery cables have inadequate terminations which lead to poor starting. The best thing to improve this condition is to strip a small amount of insulation off next to the terminal end, & solder the connection. I use a propane torch for heat & run enough solder into the joint to bond the cable & end terminal.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]